Interface converters


LAN-RS232/RS422/RS485

Interface converters RS232–Ethernet and RS422/RS485–Ethernet based on Lantronix X-Port board.

Key features:

- Supply voltage – 4 - 30 V;
- Serial port bitrate - up 921 kbps;
- Ethernet - 10/100 Мbps.

See more details at www.lantronix.com


SIO12 - device with 12 serial ports.

Dimensions: 92 х 67 х 25 mm;
Supply voltage – 5 V;
Current consumption – 250 mA or 450 mA (depends on bitrate).

Device consists of AM80C188ER CPU, 544 KB RAM, firmware.

Drivers of serial ports could be RS232, RS485 or current loop.


RS232-RS422/RS485 3kV

Key features:

Isolation – 3500 VDC;
Supply voltage – 4 - 30 V;
Bitrate – up to 115200 baud.

RS232/2 - galvanic isolation RS232

Two modules on wire opposite sides are used for galvanic isolation.

EPPS - interface with device 8 serial / 1 EPP LPT ports

EPPS is used for entering the data from 8 serial ports into the computer through parallel port in EPP mode. Bitrate of each serial port is up to 921 kbps.

Dimensions: 92 х 67 х 25 mm;
Supply voltage – 3,3 V;
Current consumption – 450 mA.
Device consists of AM80C188ER CPU, 544 KB RAM and 512KB FIFO for parallel port.